AG-FIX

AG-FIX is a special cement adhesive for basalt tiles and pipes installation to different substrates e.g. concrete, reinforced concrete and steel. Thanks to its versatility it can be used in various specialised applications.

This product is a single component dry pre-bagged grout based on high quality mineral fillers and selected Portland cement. When mixing with the appropriate amount of water, it creates a stable semi- fluid or plastic grout, suitable for long-distance pumping or for manual use.

Product Image
Advantages
  • Stability – no sagging nor bleeding
  • Fast strength development
  • Optimal pot life
Product Features
  • It can be applied manually or mechanically.
  • Being free of chlorides and alkaline additives, it provides a better protection for steel
  • Its compressive strength after 28 days of curing exceeds the 75 MPa, whilst its flexural strength exceeds the 9 MPa
  • It is classified as non-flammable product (A1)

Product Options
  • AG-FIX is supplied in 25 kg valve sack - 40 bags per pallet.

Related Products

Minova Image

Minobond Pumpable Grouts

We offer two different products within this category, that vary in setting speeds and application area.

Minobond AM is an anchoring mortar used for the grouting of steel parts in horizontal and vertical concrete surfaces and the filling of scratches, cracks, joints and deficiencies of concrete.

Minobond APS is a single component highly fluid rapid setting grout, designed especially for APS sewer manhole repair, whilst it is also used for filling backfill voids.

 

 
Minova Image

Pianocem B

Pianocem B is applied with standard machines commonly used for the supply of cement binders, e.g. pump units MONO WT 820, MONO WT-820/1.

Pianocem B is a mineral foam, which is produced at the application site by mixing the powder material with water and air at the water/powder ratio ranging from 1:1 to 2:1.

After blending with the appropriate amount of water and foaming in a suitable machine, it sets to become a durable foam.
Minova Image

Tekblend H

It is a one-component material, which after mixing at the site of application with the appropriate amount of water (water/powder ratio of range 1:1 to 2:1), sets to a durable concrete material.

Upon exiting the pump, the material is liquid and thus it is able to fill any roughness and gaps. Tekblend H gels after about 10 minutes depending on the preparation method.

Copyright Minova  All rights reserved.