Capcem™ PLG-FSL

Capcem™ PLG-FSL is a pumpable cement grout for use in the installation of mechanical long-anchors.

It is supplied in 10 kg or 25 kg lined, woven polypropylene bag. It is a single component powder that is mixed with water. The mixed grout is intended for placement through a suitable grout pump.

Product Image
Advantages
  • Pumpable up to 15 metres
  • No shrinkage or bleed water
  • No grout run-out
Features
  • Cement based product with no resins or solvents
  • Pump life of minimum 3 hours for mixing water at 25°C
  • High pH inhibits corrosion
  • Water temperature should preferably be between 20°C and 30°C
  • The grout is pumped into the drilled hole before or after installation of the anchor to give full column filling

Product Options
  • Packaged in 10 kg or 25 kg bags. Each pallet is shrink wrapped to protect the product against damage.

Related Products

Minova Image

Rock Bolts

We provide you with solutions for both active and passive methods of rock support wherever you are.

Our products range from various steel and Glass Fibre Reinforced Polymer (GFRP) bolts to steel arches, meshes and shotcretes.

Our offering can help you with:

  • Roof and ground control
  • Slope stabilisation
  • Rock fall
  • Permanent and temporary rock bolting
  • Spiling
  • Converging/yielding areas

Bolts alone may not be enough.

Many applications require additional components to ensure the desired results.

We provide steel and GFRP accessories that work in combination with our products for you to achieve the best outcomes. From drill bits, couplings, meshes to plates and nuts and trusses. Our portfolio works to provide you with the right solutions wherever you are.
Minova Image

Lokset™ Resin Capsules

Lokset capsules are filled with a reinforced thixotropic polyester resin in one compartment and a catalysed mastic filler in the other, separated by a physical barrier. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.
Minova Image

Capcem™ UWP

It is supplied as a ready-to-use dry powder requiring only the addition of water to produce a free flowing, non-shrink grout which exhibits exceptional resistance to ‘washing-out’ of the cement phase when placed in stationary or moving water.

The material is a mixture of specially processed cements. Additives impart controlled expansion, water reduction, non-washout characteristics and aid uniform mixing, minimising segregation and bleeding whilst assisting the flow characteristics.

Copyright Minova  All rights reserved.