CarboLith PL

CarboLith PL is a three-component system to be used for the application of short liners for spot repair in sewer.

CarboLith PL, Component A is a special waterglass component (aqueous sodium silicate) with
additives. Component B is a modified polyisocyanate. Component C is a blend of additives improving the components and regulating the pot life of the mixture.

The curing of component A results in a silicate.
Simultaneously a solid polyisocyanurate/polyurea is formed from the component B. Together they form an interpenetrating network, a tough-elastic, non-foamed silicate resin (organomineral resin).

Product Image
Advantages
  • Fast application
  • High adhesive strength
  • Low cost repair method
Product Features
  • Fast application (cycle time approx. 60 min)
  • No emission of odour
  • High adhesive strength even on wet surfaces
  • High chemical resistance - resistance to aggressive water, acids as well as alkaline brines, does not hydrolyse
  • Cures well and fast even in thin layers
  • Can easily be demoulded

Product Options
  • The components can be delivered in 5/20/200 l units. The C component in 1.5 l units.

Related Products

Minova Image

CarboLith Flex

CarboLith Flex, Component A, is a special sodium silicate with additives. CarboLith Flex, Component B, is a modified polyisocyanate.

The curing of Component A results in a silicate; simultaneously a solid polyisocyanurate/polyurea is formed from Component B. The mixture of these two components creates a tough, elastic, solid silicate resin (organic-mineral resin).
Minova Image

CarboPur WF

CarboPur WF, Component A is a mixture of various polyols and additives and component B is a polyisocyanate.
When the mixed resin penetrates the structure to be sealed, the water in the cracks and joints is displaced due to the hydrophoby and the viscosity of the resin. Traces of water make the resin foam.

Copyright Minova  All rights reserved.