CarboLith PL

CarboLith PL is a non-foaming elasticised three-component resin with excellent adhesion properties, used for the application of liners for spot repair in sewers.

CarboLith PL, Component A is a special waterglass component with additives. Component B is a modified polyisocyanate. Component C is a blend of additives improving the components and regulating the pot life of the mixture.

The curing of component A results in a silicate. Simultaneously a solid polyisocyanurate/polyurea is formed from the component B. Together, they form an interpenetrating network and a tough-elastic resin.

Product Image
Advantages
  • Fast application
  • No emission of odour
  • Low cost repair method
Features
  • It has a high adhesive strength even on wet surfaces
  • It has high resistance to aggressive water, acids as well as alkaline brines
  • It cures well and fast even in thin layers
  • It can easily be demoulded

Product Options
  • The components A and B can be delivered in 5/20/200 l units
  • The C component can be delivered in 1.5 l units

Related Products

Minova Image

CarboPur

These resins are applicable over a wide range of temperatures and act effectively even against pressurised water.

CarboPur resins production line offers high-quality materials for temporary or permanent applications with different reaction data and resin behavior, applicable in infrastructure and civil engineering.

CarboPur WX is used for stabilisation in wet or water bearing rock formations. It is used for sealing water tributaries from rock formations, dams, or shaft walls. It can be used in renovation of wet shafts, tunnels, sewers, or brickwork.

CarboPur WF is used for sealing against water under hydrostatic pressure from strata, dams or shaft walls, sealing and consolidation in water-bearing strata and against water under pressure.

CarboPur WS is used for curtain injection in tunnels, dams, or on shaft walls; sealing against water, stabilisation, consolidation and repairing of cracks &/or fissures.

CarboPur WFA is used for sealing strong water ingress, e.g.construction pits, pipelines, shafts, and tunnels.

CarboPur WT is used in sealing against water under hydrostatic pressure from strata, dams or shaft walls, repair of wet shafts, tunnels, channels and walls, sealing of under water concrete sheet pilings and diaphragm walls.

 
Minova Image

CarboStop

Special types with closed-cell resin structure were developed to increase ground impermeability or seal joints in civil structures.

These products are used for:

Grouting of fine to very fine hair line cracks and water-carrying sands or porous materials. Used for deep injecting, fixing of anchors, stabilisation and sealing of loose rock, stoppage of water inflow (also salt water), injecting of man-accessible sewer lines and tubes.

Stopping water inflow (also salt water), stabilisation and water sealing of loose rock, grouting of fine to medium-fine grained sands and gravel, fixing of anchors, injection of cracks, honeycombs, injections of man-accessible sewer lines and tubes

Stopping of water inflow (also salt water), sealing of loose rock, sealing of cracks and expansion joints in bridges and concrete structures. For use in deep injection, grouting of medium-fine to larger cracks, fissures, honeycombs, injections of man-accessible sewer lines and tubes where high elasticity and flexibility is required.

Stopping of flowing water, restoration of concrete structures according to German ZTV-ING.

 

Copyright Minova  All rights reserved.